04-26-2015, 04:57 PM
I may have what you are asking about.
There is a 50 Amp Receptacle that is on a short cord that is connected to the Output side of my Source Relay Panel (on the same side of the Relays that goes to the House). This way the "Buddy Receptacle" would be able to use the same Power that I am using Generator or Shore.
It cannot use the Inverter Power to the "Buddy Receptacle", I wired my Inverter to a dedicated Circuit. I installed a 3 Position Isolation Switch at the Circuit Breaker Panel so that I can choose to use the Shore Power not using the Inverter, Off, Inverter Power.
There is a 50 Amp Receptacle that is on a short cord that is connected to the Output side of my Source Relay Panel (on the same side of the Relays that goes to the House). This way the "Buddy Receptacle" would be able to use the same Power that I am using Generator or Shore.
It cannot use the Inverter Power to the "Buddy Receptacle", I wired my Inverter to a dedicated Circuit. I installed a 3 Position Isolation Switch at the Circuit Breaker Panel so that I can choose to use the Shore Power not using the Inverter, Off, Inverter Power.
Steve & Patti, Bonnie and Tucker
1982 Newell 38' Classic, DD 6V92
cocktails for as many will fit in the site, dinner for as many can sit at the pick-nick table and sleeps 2 since I fixed the couch