10-09-2015, 05:49 AM
The frame that holds the drawers is screwed on the sides to the wall if your couch is in the slide. The couch should lift up and out of the frame if the four bolts through the steel structure have been removed. Or you can look around for the screws through the side panels.
If you do alter the height of the couch, also reposition the height of the drawer slides or the drawers will close at a tilt.
Will it hit when the slide moves in and out? Dunno. I had to adjust the height of my slide couch when I redid the floors. I would mock up what I was thinking about doing and move the slide several times to make sure. Watch what you are doing. It is a hydraulic slide and it will crush whatever is in the way.
If you do alter the height of the couch, also reposition the height of the drawer slides or the drawers will close at a tilt.
Will it hit when the slide moves in and out? Dunno. I had to adjust the height of my slide couch when I redid the floors. I would mock up what I was thinking about doing and move the slide several times to make sure. Watch what you are doing. It is a hydraulic slide and it will crush whatever is in the way.
Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home
)