[ron skeen]

                   

Trouble shooting 101.....always check the easy things first....I always assume it is something expensive and/or complicated.

So true! Especially true when troubleshooting 12 volt systems. When using a voltmeter, don't forget voltage on one side does not necessaritly mean the current is flowing out the other side, especially when you are using an alternate ground for testing.

Just installed all new ride height valves and linkage from Rob at King of the road at DACP. Rob made a bracket which mounted where the old valves were. Took a short test ride and everything seem much better with the compressor not running hardly at all and the ride felt great. Was a fairly simple fix if you don't mind twisting behind the tires. I did jack and block the coach as high as possible.