02-15-2016, 11:51 AM
Sorry for the confusion Richard, the inverter is doing its job but it does not automatically switch from shore power to battery (which is very hard on my VM ESXI server computer). Along the way to (not) figuring out why it was not switching I noticed the battery charger was pulling a lot of amps and would kick off the 50 amp shore power when the microwave or AH was used.
Thanks for the advice Steve, I will look at the Outback also. We are slowly figuring out how much amperage (as close as we can figure) for each of the appliances and heating devices and which leg they are on, maybe the list I create will help someone else in the future. Maybe I should break down and read the manual for this thing (nooooo!)... This is what happens when I have a few days OFF! Tomorrow I return to work and all will be better lol.
Thanks for the advice Steve, I will look at the Outback also. We are slowly figuring out how much amperage (as close as we can figure) for each of the appliances and heating devices and which leg they are on, maybe the list I create will help someone else in the future. Maybe I should break down and read the manual for this thing (nooooo!)... This is what happens when I have a few days OFF! Tomorrow I return to work and all will be better lol.
Karen & Adrian Abshire
1998 2 slide 45' Newell Coach 498
Prior: 1985 Foretravel ORED 35, 1988 38' Foretravel U280, 2000 Foretravel 42' U320, 1990 Bluebird Wanderlodge WB40