You are not logged in or registered. Please login or register to use the full functionality of this board...


replacing wet tank
#1

I was having troubles with the check valves for my front air tanks sticking open and failing to hold pressure because of rust after a few weeks of installing new check valves.

I replaced the rear wet tank with a larger volume tank, replaced the pressure relief valve, the automatic water drain valve and added cable drains to the wet tank and the two front air tanks.
I had a problem finding a tank with the same circumference so
so that the tank could be mounted in the old clamping mechanism.

I finally got a tank on ebay and got it installed even though it was
somewhat longer. I did this in 10/12/10 but just now got around to entering the data in the forum.

Remember that the gauges for the air brake tanks should maintain pressure even when the main tank pressure drops. If the tanks do not maintain their pressure the check valve is full of rust and must be cleaned or replaced.

Attached is photo of new and old tank (they are the same circumference).


Attached Files Thumbnail(s)
   

1988 Newell 8V92 #179
40ft Tag Axel, rear window
2005 Jeep Liberty toad
Reply
#2

ron, nice to hear from you and good advice.

thanks

tom

2002 45'8" Newell Coach 608  Series 60 DDEC4/Allison World 6 Speed HD4000MH

Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)