Posts: 48
Threads: 12
Joined: Jul 2012
Hi guys, I am stuck in Reno with a shattered crown & pinion and would like to know if any of you know how to find a part # for the rear carrier assembly on my 1987 coach #123. I have a call into Chuck at Newell but have not had a response so far. There are no numbers on the carrier housing itself. The carrier is out of the coach & may have to be replaced but I need a part#. Any ideas?
Jim & Gail
1987 Newell #123
Silver 8v92/Allison 4 sp.
Toad: 2007 HHR
Life is a Highway.
Posts: 5,111
Threads: 249
Joined: Jul 2012
Jim
Is there a model number on the rear axle. Mine has a tag.
Do you know the rear end ratio?
Perhaps with those two things a truck supply can help.
Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home
)
Posts: 48
Threads: 12
Joined: Jul 2012
(04-05-2016, 03:09 PM)Richard Wrote: Jim
Is there a model number on the rear axle. Mine has a tag.
Do you know the rear end ratio?
Perhaps with those two things a truck supply can help.
I found the tag Richard, 3:55 ratio, problem solved, thanx for your help.
Jim & Gail
1987 Newell #123
Silver 8v92/Allison 4 sp.
Toad: 2007 HHR
Life is a Highway.
(This post was last modified: 04-05-2016, 03:20 PM by
djimellis.)
Posts: 1,479
Threads: 98
Joined: Jul 2012
Wow! Good job Richard
2001 Newell #579
tow a Honda Odyssey
fun car: 1935 Mercedes 500K replica
Posts: 672
Threads: 45
Joined: Jul 2012
I had the Pinion Seal replaced last year, could check with the shop that did the work if needed. Looks like you are taken care of though.
Steve & Patti, Bonnie and Tucker
1982 Newell 38' Classic, DD 6V92
cocktails for as many will fit in the site, dinner for as many can sit at the pick-nick table and sleeps 2 since I fixed the couch
