[jcus]

The trays were welded in.  I cut them out with a thin cutting disc on an angle grinder; they were good enough to just weld the front sides of the brackets so you can get to them.  
Cleaning up the rust was a mess; I scraped the big stuff out, vaccummed, and used stiff wire brush on the angle grinder for the rest.  
Glasses and a dust mask for sure; I had the shop vac running to suck up as much dust as possible - definitely do it outside if you are lucky enough to have indoor parking.

The silver paint is a zinc rich cold galvanize aerosol that I've had very good luck with as a primer and exterior paint.  I bolted the trays back in.

I tried loading these and other pics into my gallery but I keep getting an error...what am I screwing up?


Thanks

Scott

I am also getting this:  Critical error

Destination directory albums/userpics/10854/ is not writable by the script!