You are not logged in or registered. Please login or register to use the full functionality of this board...


TCI Tire Centers
#1

I have been on the road & I needed a new LF tire. I called TCI in Oklahoma City which was about 200 miles away. The manager stated he had the "315" tire in stock. When I arrived they had an open bay & began the work immediately. The manager was familiar with the Michelin Advantage Program and accepted my certificate without any issues. He also stated he stocks all the tire sizes used on Newells, including 365s. Shop was very clean. Employees were dressed in clean uniforms and the job was done quickly and cleanly. I was back on the road in just over an hour after my arrival. This company has location(s) in most states and I would recommend them based on my experience.

If interested:

http://www.tirecenters.com/store_loc/sto...myword=all

Steve Bare
1999 Newell 2 slide #531
Reply
#2

This was the first time I had used the Michelin Advantage Program, so I wasn't sure how it would go or how much the savings would be. I got registered into the program through Dupree Products. You preregister a credit card with Michelin that the purchase will be charged to. I was quoted $975 for the tire plus labor, valve stem & taxes before they knew the purchase would be through the Advantage Program. While I haven't received a broken down receipt, I have seen what my credit card was charged & the tire savings was in the $300 range.

Steve Bare
1999 Newell 2 slide #531
Reply
#3

I purchased a tire today through TCI Tire Center in Springfield, MO. They ordered the tire and got it in on schedule. I purchased the tire through the Michelin Advantage program sponsored by Dupree Products. Interesting note is that I found out that TCI Tire Centers is actually owned by Michelin and is their commercial distributor. This is the second time I have purchased tires through this company and have been very pleased.

Steve Bare
1999 Newell 2 slide #531
Reply
#4

A Steve I have used Michelin Advantage program on all my tires and it is a great savings. It is easy to use and a great program. Herman Tire Co. here in Nacdoches which does many motor homes and large trucks is a tire co. to come to if in the area. They also do State Inspections for any one from Texas.

Chappell and Mary
2004 Foretravel 36 foot
Reply
#5

I've never signed up yet for the Michelin advantage program. So how and where do I sign up?
I'll need new fronts next year but never know if I need one on the road.

Forest & Cindy Olivier
1987 log cabin
2011 Roadtrek C210P
PO 1999 Foretravel 36'
1998 Newell 45' #486 

1993 Newell 39' #337 
Reply
#6

Forest,
I signed up through Dupree Products. Just sent them an email. Here is a link.

http://www.dupreeproducts.com/SearchResults.asp?Cat=28

Steve Bare
1999 Newell 2 slide #531
Reply
#7

Just sent the e-mail to [email protected] and thanks for this info. I need 6 tires this year and was going to Newell to avoid getting my perfect wheels scratched up, but after reading about TCI I am rethinking while waiting for my certificate to arrive. Thanks Steve


Larry, Hedy & Benny Brachfeld
2003  Coach # 646
2 Slide, DD
MINI Cooper Clubman S
MINI Clubman , John Cooper Works Rally Edition # 3 of 70
Monster 1000 Watt, Electric Skateboard
Yamaha Golf Cart painted Kawasaki Green
A Coach driveway with a shade structure and swimming pool 
A Pueblo Home on the Border
Reply
#8

The Michelin tire fleet program is a part of the PrevostCommunity fuel discount program. Just email Alica for details at no extra cost to you.

Rudy Legett
2003 Foretravel U320 4010
ISM11 450 hp Allison 4000R
Factory Authorized Aqua Hot Repair Center
Southeast Texas Area
Reply
#9

Forest it is a FMCA program. Go to FMCA on your computer and go to the Michelin Advantage Program and it will give you the instructions of how to do it.

Chappell and Mary
2004 Foretravel 36 foot
Reply
#10

The Michelin Advantage Program is available through many sources. It is available through FMCA, if you are a member, Dupree Products, PrevostCommunity.Com, if you are a member, Michelin and probably others. Doesn't matter who you use, it is the same program for everyone.

Steve Bare
1999 Newell 2 slide #531
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)