11-20-2016, 06:50 AM
Richard, I do not thing the low amperage followed the compressor. When the connectors to compressor 2 were connected to compressor 1, and the connector of 1 went to compressor 2, the low amperage moved from 1 to 2 and the high amperage moved for 2 to 1. This indicates to me that both compressors will operate at high amperage when either is connected to number 2 power source. After the switch, the unit will operate on low whereas in its original configuration, the unit would run only on high. I will check to see if I have the SCS manual and if not I will get back to you.
2001 Newell #579
tow a Honda Odyssey
fun car: 1935 Mercedes 500K replica