You are not logged in or registered. Please login or register to use the full functionality of this board...

AquaHot Exhaust Blowout
Miller 135. With spool gun and cart

Will outfit with gas for SS and aluminum

I couldn't justify the all in one mig tig arc units. And I think Steve's approach is probably the better to have separate boxes for mig and tig/arc.

Laughing at yet another examples of how the gear heads all tend to gravitate to the same stuff.
Richard and Rhonda Entrekin
99 Newell, 512
Subaru Outback Toad
Inverness, FL (when we're home Cool )
Millermatic 200 Mig 220v
Airco AC stick 220v
Victor cutting rig
Steve Magown
West Monroe, LA
1997 Newell #458
Agreed. The 135 does a good job with sheet metal, uses a standard 120 volt outlet but is limited to the thickness of the metal. My Thermal Arc is made by Miller and is the smaller Inverter type that is 120/240 and will burn 1/8" Rod at the higher voltage.
Steve & Patti, Bonnie and Tucker
1982 Newell 38' Classic, DD 6V92
cocktails for as many will fit in the site, dinner for as many can sit at the pick-nick table and sleeps 2 since I fixed the couch

Forum Jump:

Users browsing this thread: 1 Guest(s)