You are not logged in or registered. Please login or register to use the full functionality of this board...


Muffler replacement
#31

Crazy as this sounds I just bought a replacement muffler on Amazon. It is coming from Truckpipesusa.com. Cost $288 plus shipping and tax about $350.

Tim K 1986 Classic 40’ #121
Reply
#32

Umm I don't need a muffler...just the correct pipe to exit exhaust gasses out the side cut out in the body.

Be seeing you,

Rick Miller
#423
1996, 45'+, Non-slide, Series 60, ABS, 1.5 Bath, Reverse Floorplan


Reply
#33

Truckpipeusa will likely have what you need.

Tim K 1986 Classic 40’ #121
Reply
#34

Just remove that 45" pipe with a 90" that will line up with the relief cut in the rocker panel.

1993 Newell (316) 45' 8V92,towing an Imperial open trailer or RnR custom built enclosed trailer. FMCA#232958 '67 Airstream Overlander 27' '67GTO,'76TransAm,'52Chevy panel, 2000 Corvette "Lingenfelter"modified, '23 Grand Cherokee.
Reply
#35

OK.. Is it a 5" pipe?

Be seeing you,

Rick Miller
#423
1996, 45'+, Non-slide, Series 60, ABS, 1.5 Bath, Reverse Floorplan


Reply
#36

I would remove that short pipe first. Loosen the two bolts on the band clamp to remove . Measure the diameter of the muffler exit pipe. Purchase an “L” shaped pipe that is obviously longer in both dimensions with an ID that will fit over the muffler pipe. Hold the pipe up beside to accurately mark where u need to cut the pipe to length on both dimensions. Use a new band clamp to install. U may need to install an additional hanger for the extension pipe.

1993 Newell (316) 45' 8V92,towing an Imperial open trailer or RnR custom built enclosed trailer. FMCA#232958 '67 Airstream Overlander 27' '67GTO,'76TransAm,'52Chevy panel, 2000 Corvette "Lingenfelter"modified, '23 Grand Cherokee.
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)