[BusNit]

The blower project is coming to a conclusion. I had more issues with corrosion that needed addressing. I removed all the decaying insulation and installed a poly the insulation that does not absorb and hold water. All metal behind it was descaled and coated with Por15 black. I drilled some water drain holes as it used to just puddle under the factory rubber mats of which I removed. I can say the new blower is extremely quiet at all speeds. Very happy with this and felt the expense was worth it. I also had to replace the compressor as it would not restart after it got hot. This entire compartment got a makeover! (Replaced the washer bottle for good measure too)