12-28-2017, 08:00 AM
Dario,
Attached are some pics that I took during the "incident". My diff blew up and the tow truck backed the rig (with motorcycle / lift) into a light post. Pretty much 2x worse than my imagination could have come up with. Anyway...here are some pics.
If you go with Hydralift, you will have to cut on the engine door. Note the notch cut out of mine in pics. Later installations done by Newell are much cleaner. They figured out that you only need to cut a slot on each side for the supports.
bill
Attached are some pics that I took during the "incident". My diff blew up and the tow truck backed the rig (with motorcycle / lift) into a light post. Pretty much 2x worse than my imagination could have come up with. Anyway...here are some pics.
If you go with Hydralift, you will have to cut on the engine door. Note the notch cut out of mine in pics. Later installations done by Newell are much cleaner. They figured out that you only need to cut a slot on each side for the supports.
bill
Bill Johnson
Birmingham, Alabama