[ccjohnson]

Sounds similar to our experience. We took ours to Lofton equipment in Phoenix, AZ. They are a servicing Kohler distributor. They replaced the slip ring & brushes. It would still not make power. They replaced the control board with used ones off work bench a couple of times to no avail. They made several phone calls looking for advice. Finally the tech was able to find the problem. A spade connector in the control box was cracked & broken. It had been taped together with electrical taped by some PO. We were very grateful that the tech there had the patience and determination to stick with it until we finally had power about an hr after closing time.