07-05-2018, 06:33 AM
Make sure the coach is cribbed.
Here is the part # you need, Haldex 102802. No need to buy the whole valve, just replace the center section.
You will be a Richard like contortionist putting it back in! (Credit: Richard Entrekin)
Take a set of straight circlip pliers to get it out. You need both arms free to get it back in. I rested my back on the driveshaft
and reached up to reinstall. if you have strong hands you can push it in far enough to compress the spring and squeeze the
circlip with the other. If not, put a deep socket with extension, big enough to go over the valve but small enough, for you to get the circlip back in.
Here is the part # you need, Haldex 102802. No need to buy the whole valve, just replace the center section.
You will be a Richard like contortionist putting it back in! (Credit: Richard Entrekin)
Take a set of straight circlip pliers to get it out. You need both arms free to get it back in. I rested my back on the driveshaft
and reached up to reinstall. if you have strong hands you can push it in far enough to compress the spring and squeeze the
circlip with the other. If not, put a deep socket with extension, big enough to go over the valve but small enough, for you to get the circlip back in.
Steve Magown
Calhoun, LA
2001 Prevost H3 Vantare
formerly Newell #458