02-11-2019, 08:31 PM
no diagrams and dont expect to find one anywhere.
i used gel superglue to hold them down and you should see where it was glued previously.
you can also look at there the sensor is on the inside where the slide pin mechanism is to see where they should go.
if that magnet is off, the pins will not go down. there should be a magnet on each slide pin hole on the slide. both have to be aligned for the pins to go down
tom
i used gel superglue to hold them down and you should see where it was glued previously.
you can also look at there the sensor is on the inside where the slide pin mechanism is to see where they should go.
if that magnet is off, the pins will not go down. there should be a magnet on each slide pin hole on the slide. both have to be aligned for the pins to go down
tom
2002 45'8" Newell Coach 608 Series 60 DDEC4/Allison World 6 Speed HD4000MH