07-10-2018, 12:15 PM
I remember the power is 120VAC and there is a relay adjacent the control box (on my 2000) operated by the ignition circuit. If ignition is on, the awning will not move. There is a possibility the relay has a inoperative contact.
I found this out while adjusting the wind speed and my arm touched the open connections of the relay. The relay is a Bosch or Hella cube with a 12VDC coil. I have found these relays don't do well handling 120v circuits.
I found this out while adjusting the wind speed and my arm touched the open connections of the relay. The relay is a Bosch or Hella cube with a 12VDC coil. I have found these relays don't do well handling 120v circuits.
Gordon Jones
2000-45'-2slide-#567