03-25-2013, 03:38 PM
The water pressure seems to start off a little higher and then drop with the temperature. It never tries to "run dry". In other words, at the kitchen sink if I put on only hot water, it still has a pretty good (not great) flow.
My brother just read the maintenance manual and said that the water / antifreeze mix should be 50%. The book said that if you have too much antifreeze, it will affect domestic hot water production. As far as I know, the cap has not been off the unit since I have had it. I have the Aquahot cooling down right now and will open it in the AM. That way I can verify the level of the water and what the mix of water to antifreeze is.
My brother just read the maintenance manual and said that the water / antifreeze mix should be 50%. The book said that if you have too much antifreeze, it will affect domestic hot water production. As far as I know, the cap has not been off the unit since I have had it. I have the Aquahot cooling down right now and will open it in the AM. That way I can verify the level of the water and what the mix of water to antifreeze is.
Bill Johnson
Birmingham, Alabama