[AlanJohnson]

My slide mechanism seems to look different from the photos I've seen on how to do this. I'll attach some photos here.

I have not been able to get my slide to retract yet. It retracts approx 1/2" on the forward side, and is flush on rear of coach side.  The only stop I found was on the end of the hydraulic actuator. I adjusted it out a couple inches, but the slide appears to be hitting something else, or another stop I cannot find. I circled the adjustment on the actuator in one of the photos. You can also see where I removed the stop switch for slide coming in. When bringing it in, it feels like a hard stop (hitting something).

Anyone had experience with this, or have a setup like mine? 

Thanks,
Alan