05-29-2019, 06:20 AM
Gurus, The diagram in the first post is a little misleading. I actually did not install the shunt yet....it is part of the Magnum state-of-charge system. It goes in the negative lead...right after battery before anything else. Also, the fuse should be installed in the positive 12VDC side before anything else. Magnum recommends a 250 amp fuse.
Don't blindly follow anything I say.....You should spend some time with Georg Ohm before you try this at home!
bill
Don't blindly follow anything I say.....You should spend some time with Georg Ohm before you try this at home!
bill
Bill Johnson
Birmingham, Alabama