06-08-2019, 03:25 PM
Richard,
Thanks for the post. I have one of those progressive thingy’s so it was easy to forget about the screw on plug end. I went to remove the plug from the progressive thingy and it was really hard to unplug it. Corrosion had set up on the blades and made it difficult to unplug. I got it apart and used Emory cloth on the blades and also used some contact cleaner. I also took the plug apart and checked the wiring. The wiring was fine.
So easy to do, but so hard to remember to do. Thanks again for heading off a headache down the road.
Bill
Thanks for the post. I have one of those progressive thingy’s so it was easy to forget about the screw on plug end. I went to remove the plug from the progressive thingy and it was really hard to unplug it. Corrosion had set up on the blades and made it difficult to unplug. I got it apart and used Emory cloth on the blades and also used some contact cleaner. I also took the plug apart and checked the wiring. The wiring was fine.
So easy to do, but so hard to remember to do. Thanks again for heading off a headache down the road.
Bill
Bill Johnson
Birmingham, Alabama