You are not logged in or registered. Please login or register to use the full functionality of this board...


[-]
Tags
password outback mate

Outback Mate password
#1
Is there a default password for the Outback Mate generator control panel (the one above the driver)? To get to the advanced setup screen, the manual shows the password number as 132, but that is incorrect. 

The reason I'm asking is that it seems to have the gen exerciser enabled and I'd instead prefer to control it through the kitchen touchscreen.
Mick & Renee
2009 Newell 45’ 8” #1277, C15 625HP 12-speed ZF
Full time working and traveling. 
#2
I found it in the PSX-240-Relay manual: 141

A follow-on questions. What does the PSX-240-Relay do? It looks like it should take a single-phase input from the inverters (and possible 30A shore power) and produce a dual-phase output. If that were the case the 240V appliances should work, but they don't. So has it another purpose - to connect single-phase to both legs and therefore power any 120V loads, but not power 240V loads (because they are the same phase).
Mick & Renee
2009 Newell 45’ 8” #1277, C15 625HP 12-speed ZF
Full time working and traveling. 


Forum Jump:


Users browsing this thread: 1 Guest(s)