You are not logged in or registered. Please login or register to use the full functionality of this board...


changing both electric elements on aquahot
#4

Good job! Could the popping noise be the relay? Mine is mounted on right wall above the AH. It was acting weird a few years ago.

Also, the electrical connections under the access door on the front (curbside) of the unit can get loose and start arcing. I had this problem and have seen at least one other. Turn off the power and take off the access cover and inspect the connections. Mine just had a wire nut and when it got loose, it melted and then was arcing against the cover plate.

Rudy helped me fix that one.

Enjoy the hot water!

Bill Johnson
Birmingham, Alabama
Reply


Messages In This Thread
changing both electric elements on aquahot - by encantotom - 04-01-2020, 04:43 PM
RE: changing both electric elements on aquahot - by encantotom - 04-01-2020, 04:46 PM
RE: changing both electric elements on aquahot - by Fulltiming - 04-01-2020, 09:02 PM
RE: changing both electric elements on aquahot - by bikestuff - 04-02-2020, 04:57 AM
RE: changing both electric elements on aquahot - by folivier - 04-02-2020, 05:13 AM
RE: changing both electric elements on aquahot - by encantotom - 04-02-2020, 03:44 PM
RE: changing both electric elements on aquahot - by Wanderman - 10-23-2021, 09:26 AM
RE: changing both electric elements on aquahot - by Guy - 10-23-2021, 02:57 PM
RE: changing both electric elements on aquahot - by folivier - 10-23-2021, 03:27 PM
RE: changing both electric elements on aquahot - by Wanderman - 10-23-2021, 04:13 PM
RE: changing both electric elements on aquahot - by Wanderman - 11-07-2021, 04:21 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)