[pairodice]

I turned on the ignition key and connected a ground wire to the chassis. I found that the packard connector coming from the chassis had voltage on BOTH pins. Could this indicate a short somewhere? I am still trying to track down the ground for these wires and I think the ground *should* be the white wires since that is the common color on all the Packard connectors. I traced the wire loom through the firewall (it is way up in the top of the compartment and hard to see but I’m pretty sure it dives into the HWH bay and disappears into all the bundles of wiring… I have a wire chaser (at home) that can track down wiring and might try it on the wires (without the key being on so it is not energized) and might try it later to help find the ground wires in the bundles.