11-07-2022, 05:13 PM
(11-05-2022, 09:23 AM)Richard Wrote: Gordon,
Your memory and explanation are spot on.
The key point being, and I realize that I am repeating what you and Rudy said, that the relay is activated or the pump would not run. The next logical check is to put a voltmeter on terminals 4 and 6 to see if they have 12v. The fans are typically powered by either of these terminals as indicated by the manual in the link I posted.
If those terminals have 12v, then I would check the continuity between there and the terminals at the fan.
I checked voltage on terminals 4 & 6 at all three relays, and none of the three show 12v even though the galley works perfectly. I can hear and feel the pumps working.
I'm very frustrated.
David
2004 Newell #695
Series 60
Quad slide front entry