[Jack Houpe]

Yesterday was a tough day, removed all the 3/8" and 1/4" line sets I put in by mistake then we started on pulling the 5/8" and 3/8" line sets for the 18k btu bedroom unit. All of our work install the plastic 4" drainage in vane the tubing had to be removed, the 3/8" and 1/4" tubing pulled through this 4" plastic drain tubing with ease but the 5/8" and 3/8" made it impossible to pull through. After working on this part all day and getting it into the bedroom through the old Newell ducting I went out to take the box off the 18k inverter compressor and found it much larger than the 24k inverter compressor. It just doesn't make sense to me how a larger unit could be smaller in size! If I had to do over I would have just installed a 12k btu unit in the back I think this would have been fine for just the bedroom.