[HoosierDaddy]

A few recent pics. A friend helped me put the floor down last year. It is LVP. We put down the recommended underlayment plywood before gluing the planks down. Overall I am happy with the floor. I was a bit concerned last fall when I let the temps in the Newell get down below 40 degrees and I could see gaps forming at the ends of the planks. Once I got it in the heated shop for a day everything went back in place. You can see by the before and after pics where we removed walls and where we built new ones. We completely reupholstered the ceiling and built the kitchen cupboards and dishwasher in. All construction methods were as close to the methods Newell used originally as possible. I used high grade 3/4" plywood for the walls and cabinetry. It is laminated with Wilsonart laminate that matched the original material that Newell used where appropriate. The cabinets are covered with embossed shiny black Wilsonart to add some contrast. The refrigerator, the two bunks and the couch are original and where Newell built them. Everything else has been built in my shop except the Corian counter tops. They were done by a local cabinet shop.
The salon table had booth benches originally which I removed. The table  is next on the list for remove and replace. I have matching Corian to make a new table and plan to cut and finish it my self. The chair will get reupholstered to match.
I will try to get some good pics of the bathroom and the bedroom. They are usable but not completed yet.