10-22-2023, 01:17 PM
Th gunk in the burner, was around/on the fuel pump, solenoid, etc. I lose about 1 Pint of antifreeze over a month or so.
I read through the manual and ran the troubleshooting. bear in mind no flamethrowers as it's on my test bench. It appears the bottom left is 12v neg to motor and then top 2nd one in is 12v pos. Though the color of the pos on my connector is red.
It is definitely firing up. The photocell is clean. It could be a simple electrical problem with the photocell wiring as I tested the cell itself. Light and Dark.
I am much more concerned with the gunk buildup and where it's coming from. Came off pretty easily, maybe it wasn't rust?
I read through the manual and ran the troubleshooting. bear in mind no flamethrowers as it's on my test bench. It appears the bottom left is 12v neg to motor and then top 2nd one in is 12v pos. Though the color of the pos on my connector is red.
It is definitely firing up. The photocell is clean. It could be a simple electrical problem with the photocell wiring as I tested the cell itself. Light and Dark.
I am much more concerned with the gunk buildup and where it's coming from. Came off pretty easily, maybe it wasn't rust?
Be seeing you,
Rick Miller
#423
1996, 45'+, Non-slide, Series 60, ABS, 1.5 Bath, Reverse Floorplan