11-13-2023, 05:47 AM
(11-12-2023, 07:28 AM)Jack Houpe Wrote: Rick I just changed out leaking valves on Ken and Pam's coach, they were the type of valve that you tie a cable on and pull to get the water out of the tank but I replaced them with 90 degree fittings and 1/4 dot line to the compartment where the generator blower is located and then finished with 1/4 inch ball valves to purge the tanks. I am going to do the same to our coach soon, I think there is a thread about this that Richard started.
On our coach I removed all of the draincocks and also added 90 degree fittings with air hoses routed to easy locations to drain. I have 4 in the front that I mounted behind the right tail light to the studs that hold the a/c condenser on with a bracket. I also have 5 in the rear that I routed to the roof of the compartment with the engine bay batteries. Then don't forget about the ping tank that I added a direct ball valve.
Makes it a lot easier and more frequent drainage than having them under the middle of the coach. Some tanks never drain water so this might be overkill.
I can add pictures.....I just have to take them first if anyone is interested