[Brad Townsend]

I had a similar problem yrs ago and it was low voltage. Many post back you said the cables were cleaned and tightened but have you confirmed that you have good voltage. If the cables needed to be tightened they may be hurt not knowing how long they were loose, if they were loose. Low voltage is very fussy about having a good ground. I would check all grounds that apply. You sure are getting a lot of help. This is a great place for help. Thanks Tom.

---

One more thing. As far as the gauges go I just had mine replaced this past November at Newell. Neither one worked and the gauge and the sending units have to match which I did not know. I like the new ones they stand out better.