You are not logged in or registered. Please login or register to use the full functionality of this board...


Welded up the HWH slide pin actuator
#9

Hang on.

In the basement floor, center of the slide are two microswitches. When the “out” one makes, it stops the room, and activates the pins and floor. The room may already be all the way out. It is not unusual for the pin to move the room 1/4 of an inch. As the tapered pin goes into the hole.

The slide seal is affixed to the coach as is the HWH mounting plate. Makes no difference if room is in, out, or completely missing with regard to distance from welding to slide seal. Wet rags are your friend. Cotton, not microfiber polyester.

Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home Cool )
Reply


Messages In This Thread
Welded up the HWH slide pin actuator - by pairodice - 03-12-2024, 05:02 PM
RE: Welded up the HWH slide pin actuator - by Richard - 03-13-2024, 03:57 AM
RE: Welded up the HWH slide pin actuator - by pairodice - 03-13-2024, 05:02 AM
RE: Welded up the HWH slide pin actuator - by Richard - 03-13-2024, 07:24 AM
RE: Welded up the HWH slide pin actuator - by Gnawrocki1 - 03-13-2024, 09:03 AM
RE: Welded up the HWH slide pin actuator - by pairodice - 03-17-2024, 04:52 PM
RE: Welded up the HWH slide pin actuator - by pairodice - 03-18-2024, 04:07 AM
RE: Welded up the HWH slide pin actuator - by Gnawrocki1 - 03-18-2024, 07:33 AM
RE: Welded up the HWH slide pin actuator - by Richard - 03-18-2024, 12:47 PM
RE: Welded up the HWH slide pin actuator - by pairodice - 03-19-2024, 05:29 AM
RE: Welded up the HWH slide pin actuator - by pairodice - 03-19-2024, 04:47 PM
RE: Welded up the HWH slide pin actuator - by BusNit - 03-20-2024, 09:00 AM
RE: Welded up the HWH slide pin actuator - by Richard - 03-20-2024, 10:13 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)