04-06-2024, 04:10 PM
Finally got my new wifi and cellular enabled thermostats in. We're kind of breaking now ground as I'll be the first user to be incorporating both an SCS A/C along wiht Aquahot and we're trying to make sure we're connecting the Aquahot portion correctly. I have a few couple of questions from the owner of Waltech.
1.) On the wire that is used for Aquahot we're assuming it goes directly to the Aquahot unit?
2.) Does anyone know which wire is for Aquahot?
Attached is a pic of my existing thermostat and I use the RVComfort for basement A/C and heat by using the Gas Heat setting.
Here is the link for their website as well. Seem to be great people and have big plans for addtional integrations to make the thermostat a hub of sorts for other wireless/bluetooth items like SeeLevel tank sensors, etc.
https://www.waltechint.com
1.) On the wire that is used for Aquahot we're assuming it goes directly to the Aquahot unit?
2.) Does anyone know which wire is for Aquahot?
Attached is a pic of my existing thermostat and I use the RVComfort for basement A/C and heat by using the Gas Heat setting.
Here is the link for their website as well. Seem to be great people and have big plans for addtional integrations to make the thermostat a hub of sorts for other wireless/bluetooth items like SeeLevel tank sensors, etc.
https://www.waltechint.com
Brad Aden
2003 Newell #653 Quad Slide Cat C-12 engine
St. Louis, MO
)