The gremlins got me after installing all new fittings , hose and check valve the system holds air just fine but only when I start the engine. The Thomas compressor runs and sounds normal and all other systems seem fine or were replaced except the actual compressor itself....
So can I get a model number of a jun-air or gast that's quiet and fits in the bay under the copilot PLEASE ? and a source please..THanks
Larry
If you use a Jun air you need to be sure and add a oil seperator as they use oil by design and will contaminate your system if there is not one there.
That's only the oil one. My Junair is oiless
Tom
Mine is a 1/3 hp Gast from Grainger. I am at work in St Johns but can try to find Grainger # when I get back home. They should have a pic though on their website to help you in getting the right one.
the problem with the gast is space. my 90 i put a new gast in and it took the entire floor of the compartment in front of the drivers front wheel.
i would not have had space to put the larger footprint gast in my 02.
tom
Mine sits on top of the "squirrel cage" blower in front compartment on curb side.
i have not seen one there. seems like that would be too tight on mine.
the best place i have seen is in the generator compartment. i wish mine was there.
tom
My Gast is above the squirrel cage fan on curb side as well.