Newell Gurus

Full Version: Tow Bar Advice
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2 3
Guys when we bought our 84 coach this summer along with the many things it came with tucked in here and there was a RoadMaster tow bar. I forgot the model but it is one of the higher levels. I have a 2006 Jeep Wrangler I would like to set up to tow. The coach has a hutch and is wired for lights.

Local RV place wants $459 for baseplate and another $450 to install it. They also want $250 to wire the jeep for lights. I can find the baseplate online for $329 I think. So my questions? Should I have a pro do this or can I install it? Should I wire the lights or should I just buy the magnetic ones for $50 bucks and stick it on the jeep each time we tow? Any other pointers or suggestions would be appreciated.
I have installed the base plate on several cars without a problem. A new base plate should have good instructions. As to lights, I recently installed wireless LED lights. The transmitter mounts in the engine compartment, and the wireless lights attach by magnet. While they are not cheap, it beat the the expense and trouble to wire lights from the coach to the tow.
Todd:
Many of us are doing it this way. Pull the tail light assembly, drill a hole in the backside and install a bulb socket with an 1157 two element bulb. You can get this at any auto parts store. I used a 20 foot trailer lighting wiring kit. Plug it to the lights and run it to the front using tie wraps. I put my front plug in the engine bay coiled up when not using. It is a flat-4 connector. I got a 7 pin (back of coach) to flat four adapter at Walmart and I'm ready to roll. the instructions are all over the net.
Todd,
I wired up my HHR and installed the base plate myself. Go online and you can download the instructions for installing the Roadmaster base plate on your vehicle. The instructions are very complete with photos. Then you can decide if it is within your ability and tools.
Any suggestions where to buy these things guys?
I'd just shop online. PPL usually has good prices and they are good to deal with.
just bought the bracket there. very good price. Ok how about the wireless lights where do you recommend I look?
(12-20-2012, 06:23 PM)Flick Wrote: [ -> ]just bought the bracket there. very good price. Ok how about the wireless lights where do you recommend I look?

I have purchase 3 from tow mart http://www.towmart.com/22-inch-wireless-towing-light Matt Russo has one and I still have one that I carry as a spare. Good people to do business with and nice products. I also have a new Blue ox base plate BX 1979 that I just order and it did not fit my new 2008 ram 1500 quad cab. It fits a Ram Mega cab or sports.
(12-20-2012, 08:59 AM)Chester Stone Wrote: [ -> ]I have installed the base plate on several cars without a problem. A new base plate should have good instructions. As to lights, I recently installed wireless LED lights. The transmitter mounts in the engine compartment, and the wireless lights attach by magnet. While they are not cheap, it beat the the expense and trouble to wire lights from the coach to the tow.

Second the wireless light. This is easy....however I do still have wired for back-up. If someone lifts my lightbar......
Problem though is that the light bar attaches with magnets. The jeep has a cloth top or a fiberglass top. The bumper has a spare tire on it. So I really do not know how to attach the bar. The one you guys recommended sounds great and is only $189 but not quite sure how to attach it to a 2006 Jeep Wrangler. Any suggestions would be great as I assume wiring it would be difficult.
Pages: 1 2 3