Newell Gurus

Full Version: Water Auto-Fill Spyder Settings
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
The Spyder Control Panel offers Auto-Fill settings to select "Start Level" percentage, "Stop Level" percentage to start and end the auto-fill. 

Does anyone know what the water fill settings for "Max Time Out" minutes, "Run After Minutes" and "Run After Seconds" should be and what they do?
(07-04-2022, 06:25 AM)hypoxia Wrote: [ -> ]The Spyder Control Panel offers Auto-Fill settings to select "Start Level" percentage, "Stop Level" percentage to start and end the auto-fill. 

Does anyone know what the water fill settings for "Max Time Out" minutes, "Run After Minutes" and "Run After Seconds" should be and what they do?

Sorry I never saw this, Jim.

The SILVERLEAF settings for Autofill are COMPLETELY inactive. Our Newells using a mechancial switch in the water bay. This was a great "topic" of my discussions with them over the past year or so!  Some were misled and has led to a lot of confusion on the topic...even as of today...as we argue exactly WHAT the "water path" is; seems a bit of a mystery!
Thanks Steve,
I had two reed switches fail due to the sloshing cycling the reed switch so much. I bought a timer relay to give it 30 seconds between cycles but haven't gotten around to wiring it in.