Newell Gurus

On a recent trip, I  noticed that the coolant expansion tank (in the rear engine area) had a pin hole size leak (Coach #1517) The tank is aluminum.  I did a temporary fix using JB Weld and it is holding for now.  I checked with Newell and they no longer use the same tank.  A new one is $956 (Wow!) 

I am taking the coach there next month for the annual service and they seem pretty confident that trying to repair the leak by welding will work.

Has anyone else had this issue with their coach

Thanks

Not sure what yours looks like but in the older coaches it was recommended to change out from plastic to stainless, here is what I did.

https://newellgurus.com/showthread.php?tid=7342

(03-21-2024, 04:05 AM)Jack Houpe Wrote: [ -> ]Not sure what yours looks like but in the older coaches it was recommended to change out from plastic to stainless, here is what I did.

https://newellgurus.com/showthread.php?tid=7342

Jack,

Thanks for the reply.  My tank is aluminum.   The pin hole leak is at the original weld point.  The tank itself is pretty heavy.  I would guess 5+ pounds

Your JB weld trick should work for sometime but if you want it fixed right then take if off and have someone tig weld it. If your close by Newell stop by our place and I'll do it for you.

(03-21-2024, 05:53 AM)Jack Houpe Wrote: [ -> ]Your JB weld trick should work for sometime but if you want it fixed right then take if off and have someone tig weld it. If your close by Newell stop by our place and I'll do it for you.

Jack,

How close to Miami, OK are you

He is about an hour away. We stopped at his beautiful home for a visit last year.