Water Auto-Fill Spyder Settings - Printable Version
+- Newell Gurus (
https://newellgurus.com)
+-- Forum: Technical Discussions (
https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Plumbing and fixtures (
https://newellgurus.com/forumdisplay.php?fid=9)
+--- Thread: Water Auto-Fill Spyder Settings (
/showthread.php?tid=6853)
Water Auto-Fill Spyder Settings -
hypoxia - 07-04-2022
The Spyder Control Panel offers Auto-Fill settings to select "Start Level" percentage, "Stop Level" percentage to start and end the auto-fill.
Does anyone know what the water fill settings for "Max Time Out" minutes, "Run After Minutes" and "Run After Seconds" should be and what they do?
RE: Water Auto-Fill Spyder Settings -
CaptainGizmo - 06-20-2023
(07-04-2022, 06:25 AM)hypoxia Wrote: The Spyder Control Panel offers Auto-Fill settings to select "Start Level" percentage, "Stop Level" percentage to start and end the auto-fill.
Does anyone know what the water fill settings for "Max Time Out" minutes, "Run After Minutes" and "Run After Seconds" should be and what they do?
Sorry I never saw this, Jim.
The SILVERLEAF settings for Autofill are COMPLETELY inactive. Our Newells using a mechancial switch in the water bay. This was a great "topic" of my discussions with them over the past year or so! Some were misled and has led to a lot of confusion on the topic...even as of today...as we argue exactly WHAT the "water path" is; seems a bit of a mystery!
RE: Water Auto-Fill Spyder Settings -
hypoxia - 06-20-2023
Thanks Steve,
I had two reed switches fail due to the sloshing cycling the reed switch so much. I bought a timer relay to give it 30 seconds between cycles but haven't gotten around to wiring it in.