Posts: 2,667
Threads: 226
Joined: Jul 2012
Thought of Star Trek: More power Scotty (Rhonda). I'm giving it all she got captain!
Glad it's working out.
Forest & Cindy Olivier
1987 log cabin
2011 Roadtrek C210P
PO 1999 Foretravel 36'
1998 Newell 45' #486
1993 Newell 39' #337
Posts: 282
Threads: 7
Joined: Mar 2020
Did Scotty use dilethium crystals? I'm not a Trekky by any means but I seem to remember this.
Glad to see you're on the road again without much or any delay.
Hank & Natalie Bensley
2001 Double Slide #586.
2021 Cherokee Trailhawk Toad
We've been RV owners since 2002.
Port Orange, FL. Soon we will travel full time for "a while"
Posts: 1,518
Threads: 155
Joined: Jul 2012
I had a mental image of Richard rigging up a boat throttle and attaching it on the left armrest. He also had a captains hat!
Glad that it is all better.
Bill Johnson
Birmingham, Alabama
Posts: 5,157
Threads: 251
Joined: Jul 2012
So don't laugh. It came to me that I had a heavy duty potentiometer on board. I think Incould have robbed the windshield wiper knob and used the adjustable part of the function to rig a potentiometer to get the coach to safety .
Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home
![Cool Cool](https://newellgurus.com/images/smilies/cool.gif)
)
Posts: 1,031
Threads: 65
Joined: Sep 2022
I don't gamble but would have put money down that you could have come up with something before sitting on the side of the road very long. Mr MacGyver.
1999 45' #504 "Magnolia"
Gravette, Arkansas
1996 40 XL Prevost Marathon
Posts: 282
Threads: 7
Joined: Mar 2020
Maybe something rigged with a coat hanger, oven mitts, and Luma-connectors. It could operate similar to those slide whistles we had as kids (like a trombone).
I know Richard likes those connectors...
Hank & Natalie Bensley
2001 Double Slide #586.
2021 Cherokee Trailhawk Toad
We've been RV owners since 2002.
Port Orange, FL. Soon we will travel full time for "a while"
Posts: 5,157
Threads: 251
Joined: Jul 2012
In my exhilaration of leaving Tok, I forgot to post the part number.
https://advancetruckpartsusa.com/product...sensor-kit
https://www.amazon.com/dp/B07MJHKQTS?psc...ct_details
Make sure you get the kit and not just the sensor. Why? It appears to me that the sensors have standardized on a five pin setup, meaning it has an idle validation circuit. However, the DDEC III at least requires a three pin setup. The cable that comes with the kit adapts the five pin sensor to the three wire Packard connector.
Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home
![Cool Cool](https://newellgurus.com/images/smilies/cool.gif)
)
Posts: 279
Threads: 17
Joined: Jun 2023
(08-22-2023, 07:40 PM)Richard Wrote: In my exhilaration of leaving Tok, I forgot to post the part number.
https://advancetruckpartsusa.com/product...sensor-kit
https://www.amazon.com/dp/B07MJHKQTS?psc...ct_details
Make sure you get the kit and not just the sensor. Why? It appears to me that the sensors have standardized on a five pin setup, meaning it has an idle validation circuit. However, the DDEC III at least requires a three pin setup. The cable that comes with the kit adapts the five pin sensor to the three wire Packard connector.
Thanks for posting Richard. I am going to go ahead and get one as a spare.
Reminds me I also need to get an SRS and TRS to carry along.
If you have a Series 60 I highly recommend carrying a spare SRS and TRS. I will try to get a photo of them to show where they are located on the engine. So both sensors are required to allow the engine to start, then it will run on only one sensor. So if you are have an issue where the engine turns over but will not start, these what I would try first.
Best thing is to look them up by your engine serial number. I will see about looking mine up and I will let you know the part numbers.
For those that may want to know what they are:
Synchronous Reference Sensor
Timing Reference Sensor
Posts: 1,031
Threads: 65
Joined: Sep 2022
More good info Jeff, I'll wait for your pictures and part numbers. Must be a Hall effect type sensor for TDC?
1999 45' #504 "Magnolia"
Gravette, Arkansas
1996 40 XL Prevost Marathon
Posts: 279
Threads: 17
Joined: Jun 2023
(08-23-2023, 06:28 AM)Jack Houpe Wrote: More good info Jeff, I'll wait for your pictures and part numbers. Must be a Hall effect type sensor for TDC?
I forget what it’s called but I don’t think it’s Hall effect. They produce more of a signal like a sine wave.
Just remembered, I think they are reluctance sensors.
Here is some good info:
TRS
http://www.detroitdieselengines.info/ser...ensor.html
SRS
http://www.detroitdieselengines.info/ser...ensor.html
Jeff LoGiudice
Temple Terrace, Fl
1984 Bluebird Wanderlodge PT40
1998 Newell 2000 #490
1986 MCI/TMC 102A3 (sold)