03-10-2019, 08:31 AM
AS you know Kid's Soap Bubble solution in a spray bottle is your friend.
Take a look at the air operated dump valve, and it's pneumatic control actuator.
Same thing for door actuator.
Take a look at the sequence valve on the potty.
Take a look at all the air plumbing associated with the pump.
If you have the little air/water separators associated with the pump and the rear six pack, look at the plastic bowls on those. Known to crack and leak like a sieve.
And I hate to say this, but a blown air seal results in a massive leak. You should have isolation valves on the air seals.
Do you have a 12V pump? If so that should keep the seals and potties going.
Take a look at the air operated dump valve, and it's pneumatic control actuator.
Same thing for door actuator.
Take a look at the sequence valve on the potty.
Take a look at all the air plumbing associated with the pump.
If you have the little air/water separators associated with the pump and the rear six pack, look at the plastic bowls on those. Known to crack and leak like a sieve.
And I hate to say this, but a blown air seal results in a massive leak. You should have isolation valves on the air seals.
Do you have a 12V pump? If so that should keep the seals and potties going.
Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home )