My Total Vision rear view monitor which is about 11" wide quit today. I took it apart & found a burnt power plug. I destroyed the receptacle, cut the plug off & soldered the wires to the board. All is good now, it works great!
Jim
2014 Newell Coach 1482 Mid Entry 45'8" Valid Slides and Valid Levelling
(06-20-2026, 02:34 AM)Jack Houpe Wrote: God job Jim. Did you smell that burning at some point in time?
I smelled it when I removed it from the mount. That gave me hope, I had assumed I would have to replace it until the odor hit me. I also looked for the Hitachi INVC639 board, couldn't find one.
Jim
2014 Newell Coach 1482 Mid Entry 45'8" Valid Slides and Valid Levelling
Is that DC or AC? Very surprising it burned up like that. Appears that it might have been a high resistance connection but wondering if something else is going on that started pulling more current through the connection?
(06-20-2026, 06:52 AM)[email protected] Wrote: Is that DC or AC? Very surprising it burned up like that. Appears that it might have been a high resistance connection but wondering if something else is going on that started pulling more current through the connection?
I don't know, I just assumed a poor connection but haven't looked any farther.
Jim
2014 Newell Coach 1482 Mid Entry 45'8" Valid Slides and Valid Levelling
)