03-10-2019, 08:31 AM
AS you know Kid's Soap Bubble solution in a spray bottle is your friend.
Take a look at the air operated dump valve, and it's pneumatic control actuator.
Same thing for door actuator.
Take a look at the sequence valve on the potty.
Take a look at all the air plumbing associated with the pump.
If you have the little air/water separators associated with the pump and the rear six pack, look at the plastic bowls on those. Known to crack and leak like a sieve.
And I hate to say this, but a blown air seal results in a massive leak. You should have isolation valves on the air seals.
Do you have a 12V pump? If so that should keep the seals and potties going.
Take a look at the air operated dump valve, and it's pneumatic control actuator.
Same thing for door actuator.
Take a look at the sequence valve on the potty.
Take a look at all the air plumbing associated with the pump.
If you have the little air/water separators associated with the pump and the rear six pack, look at the plastic bowls on those. Known to crack and leak like a sieve.
And I hate to say this, but a blown air seal results in a massive leak. You should have isolation valves on the air seals.
Do you have a 12V pump? If so that should keep the seals and potties going.
Richard and Rhonda Entrekin
95 Newell, 390 Ex caretaker
99 Newell, 512 Ex caretaker
07 Prevost Marathon, 1025
Maverick Hybrid Toad
Inverness, FL (when we're home
)
