11-08-2017, 03:51 AM
Mike your column is different but the attachment between the steering column and the steering gear box still uses an intermediate shaft with two universal joints. The majority of my play was at the upper attachment.
Remove the skirt around the steering column. Turn the wheel back and forth and look carefully at the upper junction. It will be right at floor level. Put your hand on it, while working the steering wheel, and see if you feel any slop.
Remove the skirt around the steering column. Turn the wheel back and forth and look carefully at the upper junction. It will be right at floor level. Put your hand on it, while working the steering wheel, and see if you feel any slop.
Richard and Rhonda Entrekin
95 Newell, 390 Ex caretaker
99 Newell, 512 Ex caretaker
07 Prevost Marathon, 1025
Maverick Hybrid Toad
Inverness, FL (when we're home
