05-19-2015, 07:04 AM
hi russ,
i replaced the solenoid last friday morning. so it has been 4 days and from what i can tell, no movement yet.
i was just thinking if one of them needed done, i wanted to preplan for it. the local CAT hydraulic ram rebuild shop happens to be only about 30 minutes from me as that is where i went to pick up and drop off my engine oil sample i had done a week or so ago.
when i converted the rear office to my bedroom on mine, i replaced part of the slide floor (it is a flat floor slide in the bedroom, and i know many are not). and i left an access panel to get at the ram in the floor under the bed. i think there is only one ram in the rear slides.
i was most hopeful the check valve would fix it but i didnt even try when i saw that mine didnt have the check valve for each ram, but rather one for all of them.
tom
tom
i replaced the solenoid last friday morning. so it has been 4 days and from what i can tell, no movement yet.
i was just thinking if one of them needed done, i wanted to preplan for it. the local CAT hydraulic ram rebuild shop happens to be only about 30 minutes from me as that is where i went to pick up and drop off my engine oil sample i had done a week or so ago.
when i converted the rear office to my bedroom on mine, i replaced part of the slide floor (it is a flat floor slide in the bedroom, and i know many are not). and i left an access panel to get at the ram in the floor under the bed. i think there is only one ram in the rear slides.
i was most hopeful the check valve would fix it but i didnt even try when i saw that mine didnt have the check valve for each ram, but rather one for all of them.
tom
tom
2014 Haulmark 40' Super C on Freightliner Cascadia ISX15 Easton 13 speed
Former Owner 1990 38' Newell Coach 236 8V92
Former Owner 1999 45'8" Newell Coach 526 Series 60
Former Owner 2002 45'8" Newell Coach 608 Series 60