05-11-2016, 04:21 PM
I learned by experience that adjusting the linkage between the solenoid and the fuel arm is backwards to me intuitively. My solenoid was not consistently pulling in so I shortened the linkage further pulling on the fuel arm. WRONG. That just made it worse. Gordon explained it to me. The plunger has to pull all the way into the coil to stay in the run position. So lengthening the linkage allowed the solenoid to fully "pull in"
Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home )