[encantotom]

hi richard,

i bought the 2 dorman vacuum pumps....btw, it is exactly the same pump that is on my F350 powerstroke.

i will use spade connectors for the wires, even though the pins are round. the insulated spade connectors fit with one side of the spade on each pin.

can you take a picture of the fittings they used coming off the solenoid valve at the exhaust port where the vacuum hose would connect going to the vacuum pump? i have not been successful in finding a 1/4" male NPT to 7/64 barb adapter fitting.

thanks

tom