04-23-2018, 04:38 AM
Hmmmmmmmmmm,
I have had really good luck with 3M adhesive remover. Soak, and scrape with a putty knife. Worked better than anything I have tried including wire brush on side grinder, air chisel, razor scraper, and a good talkin to.
The key is to keep the working edge wet with the adhesive remover.
By the way, thanks to a tech at Newell for this trick. He saw me struggling to reskin a bay door. He came back with a spraycan of the 3M. I couldn't believe how well it worked.
I have had really good luck with 3M adhesive remover. Soak, and scrape with a putty knife. Worked better than anything I have tried including wire brush on side grinder, air chisel, razor scraper, and a good talkin to.
The key is to keep the working edge wet with the adhesive remover.
By the way, thanks to a tech at Newell for this trick. He saw me struggling to reskin a bay door. He came back with a spraycan of the 3M. I couldn't believe how well it worked.
Richard and Rhonda Entrekin
95 Newell, 390 Ex caretaker
99 Newell, 512 Ex caretaker
07 Prevost Marathon, 1025
Maverick Hybrid Toad
Inverness, FL (when we're home
)