[jdkskyking]

Hello,

I’ve never had a coach with a tag so I would appreciate some guidance on weighing it.

No individual scales available in my area so I would use a CatScale.

I’m unsure how to position it on the scale and what configuration the tag should be in.

I’ve attached a CatScale weight I took after topping off the fuel tank and probably 1/2 tank water & 1/2 tank holding. Driver only...

Steer 16520
Drive 32580
Trailer 3000
I’m sure I had tag switch in the center position. 

Obviously I’m trying to get a full understanding of what tire pressures I should use. 
Using the Michelin charts, based on this info, I’m coming up with:

Fronts - 100 psi for the 365s 16520/8260 (100 psi single 8780)

Rears - 125 psi for each of the 315s (125 psi single 8690 or dual 15820) or (130 psi dual 16540)

If I’m reading this correctly I need to run the rears at 130...??? 

Slightly confused.... 

Thanks, JK