02-19-2019, 10:13 AM
I just replaced all 4 of my front air bags on my 1996, #406, solid axle. GOODYEAR air spring, part #1R11-066
I got mine at Stengel Brothers on line... (147.00 each)
https://www.stengelbros.net/1R11-066-Goo..._5630.html
It was not too bad to do. Crib it up, remove all bolts. You will need to cut the angled air supply fittings with a (high quality) chopsaw blade, I repeat (high quality) they are very strong fittings, but with the right blade it is easy. Then, obviously replace all 4 fittings (Grainger).
I could not remove the bags without cutting the fittings, and was not willing to waller out the hole to do it.
Hope this helps.
Not sure about the rear bags, have not done them yet.
Let me know the part numbers if you do them!
John
I got mine at Stengel Brothers on line... (147.00 each)
https://www.stengelbros.net/1R11-066-Goo..._5630.html
It was not too bad to do. Crib it up, remove all bolts. You will need to cut the angled air supply fittings with a (high quality) chopsaw blade, I repeat (high quality) they are very strong fittings, but with the right blade it is easy. Then, obviously replace all 4 fittings (Grainger).
I could not remove the bags without cutting the fittings, and was not willing to waller out the hole to do it.
Hope this helps.
Not sure about the rear bags, have not done them yet.
Let me know the part numbers if you do them!
John
John, Sheri & Lily Kai Curwick
1996 Newell #406, 2015 Jeep Rubicon Hard Rock, FJ Cruiser, Harley Fatboy. 35 CABO Express
