08-04-2019, 11:26 AM
Q1. The end of the wire you cut that is not connected to the relay leads to the compressor. The hot wire of the pair will be powered by the contractor. The neutral wire will need to be spliced into neutral.
Chester chose to picture the original 120V connections on the board. Keep in mind, you are looking at a schematic.
Q2. All of the connections are spliced since none of the original wires are long enough to reach outside the enclosure where the contactors are mounted.
Call me at 817 223 2056 if you need interactive help.
Chester chose to picture the original 120V connections on the board. Keep in mind, you are looking at a schematic.
Q2. All of the connections are spliced since none of the original wires are long enough to reach outside the enclosure where the contactors are mounted.
Call me at 817 223 2056 if you need interactive help.
Richard and Rhonda Entrekin
95 Newell, 390 Ex caretaker
99 Newell, 512 Ex caretaker
07 Prevost Marathon, 1025
Maverick Hybrid Toad
Inverness, FL (when we're home
)