12-31-2021, 06:53 PM
i have a 2002 as well. if the locking pins are down, i really cant move very much if at all. what causes slide creeping out is the extend solenoid valve on the manifold leaking by. and since the rams are on the bottom, if they are creeping out, the bottom would come out first. you didnt say what the bottom was doing.
the one valve services both rams if the slide has 2. the long slides have two and the smaller slides have one. i only have 2 slides so i dont know what slide number 4 is.
if it has two rams, and one is leaking internally at the piston, then it is possible for just one side to move and not the other. but you would notice that at the bottom first i believe.
keep an eye on it. btw, if for some reason and or way it can continue to creep out, (like if the pins are not down), the slide seal can roll out.
tom
keep an eye on it.
the one valve services both rams if the slide has 2. the long slides have two and the smaller slides have one. i only have 2 slides so i dont know what slide number 4 is.
if it has two rams, and one is leaking internally at the piston, then it is possible for just one side to move and not the other. but you would notice that at the bottom first i believe.
keep an eye on it. btw, if for some reason and or way it can continue to creep out, (like if the pins are not down), the slide seal can roll out.
tom
keep an eye on it.
2014 Haulmark 40' Super C on Freightliner Cascadia ISX15 Easton 13 speed
Former Owner 1990 38' Newell Coach 236 8V92
Former Owner 1999 45'8" Newell Coach 526 Series 60
Former Owner 2002 45'8" Newell Coach 608 Series 60